Ender-3 Touch Screen Creality

Product Description:

Original Creality Touch Screen KIT
Compatibility: Ender 3/Ender-3 Pro/Ender-3 V2 with V4.2.2 or V4.2.7 mainboards.
Screen size: 4.3 inches

WARNING:

• This display is not compatible with the Creality Ender-3 Max model!
• The firmware must be selected according to the mainboard installed in your printer.
• Based on this, download the "4.2.2_Mainboard.zip" or "4.2.7_Mainboard.zip" file from the DOWNLOADS section.

After downloading, extract the file contents and follow these steps:

• Mainboard programming:
  • You will need a microSD card.
  • Format the microSD card.
  • Copy the appropriate .bin file onto the microSD card based on the mainboard version and the presence of the BLTouch sensor.
  • Turn off the printer’s power.
  • Insert the microSD card into the mainboard’s slot.
  • Turn on the printer’s power.
  • Next, the display firmware needs to be updated.
• Display programming:

• • You will need a microSD card with a maximum capacity of 16GB; programming the display is not possible using a larger microSD card!!!
  • Format the microSD card using FAT32 and 4096 bytes.
    
  • Copy the DWIN_SET folder onto the microSD card from the previously downloaded folder.
    
  • Turn off the printer’s power.
  • Disconnect the display from the printer.
  • Unscrew the 4 screws from the back of the display.
  • Insert the microSD card into the slot on the display’s PCB.
  • Reconnect the display to the printer and turn on the power.
  • The display will show some information about the file loading process, and then the screen will turn gray (the programming is complete).
    
  • Turn off the power.
  • Remove the card, disconnect the display, reattach the cover using the 4 screws, and reconnect the display.
  • Restart and test the printer’s functionality.

Package Contents:

1x touch screen display

1x cable

3x screws

3x T-nuts