Tester: diode, transistor, resistor, capacitor, inductor

Product Description:

Tester for diodes, transistors, capacitors, and inductors that displays the measured value on the screen.

The component pins must be placed between terminals marked with different numbers (for example, between 1 and 3), then clamped into the socket, and the button pressed.

The upper sockets are internally connected to the lower ones in columns (those labeled with 1 are all five interconnected).

To test a component, it must be connected between sockets with different numbers, for example:

• a component with 2 terminals (resistor, capacitor, inductor, diode, etc.):
  
• a component with 3 terminals (bipolar transistor, MOSFET transistor, TRIAC, etc.):
  

The type of component and the measured value will be displayed on the screen.

Technical Specifications:

• Materials: ABS and electronic components
• Dimensions: 6.3cm x 4.1cm / 10cm x 8cm
• Inductor: 0.01mH-20H, Capacitor: 25pF - 100,000 µF
• Resistance: 0.1 ohm resolution, maximum 50M ohm
• 128x64 LCD Backlight Display, 2mA consumption in standby mode
• Chip: Atmega328

Note: It requires a 9V DC battery for power, which is not included in the package!

Measurable Components:

• Inductors
• Capacitors
• Diodes
• Transistors
• Thyristors
• LEDs
• Resistors
• Potentiometers

Package Contents:

1x Electronic component tester unit