XH-W3001 Digital Thermostat Module 10A 220V

Overview

The module can control heating or cooling by the use of a start temperature and a stop temperature.

Specifications

Rating Voltage: 220V AC
Temperature measuring range: -50 ~ 110℃
Temperature control range: -50 ~ 110℃
Temperature measurement accuracy: ±0.2℃
Temperature control accuracy: ±0.1℃
Input measurement: NTC10K probe L = 1 meter waterproof
Input power: according to the classification of choice
Output power: according to the classification of choice
Appearance size: 60 x 45 x 31 mm

Instructions

To set a temperature press and hold one of the buttons until the display starts flashing.

The left button is for the ON temperature and the right button is for the OFF temperature.

While the display is flashing that temperature can be adjusted up and down in small 0.1 degree steps or faster if the up/down button is held in continuously.

When the temperature has been set the display will stop flashing after a short delay and revert to displaying the current sensed temperature.

Hysteresis (temperature difference between turning on and off) is simply set by choosing that gap between the on and off settings.

So an ON temperature of 20C and an OFF temperature of 23C would have a hysteresis of 3C. 

Pressing and holding both buttons will do a short display test and revert to factory set temperatures.

Any temperature setting changes are stored in nonvolatile memory and will be kept even if the unit is powered down.