Toate produsele din topul vanzarilor
  • PCB Design

  • Pret redus
Ender-3 Touch Screen Creality
  • Ender-3 Touch Screen Creality
  • Ender-3 Touch Screen Creality

Ender-3 Touch Screen Creality

CUMIYQ_4001050015
250,88 lei
167,26 lei Economiseste 83,62 lei
Include TVA
Cantitate
Stoc epuizat

  Livram și în lockere

Preț de la 10.27 LEI
Ridică-ți comenzile când vrei tu!

  Livrare rapidă: o zi lucrătoare!

Comandă până la ora 14:00 și expediem astăzi coletul

  Garantie 2 ani

Produse sigure, fără griji!

  Retur simplu în 14 zile

Produse nefolosite? Retur fără întrebări!

Descriere

Product Description:

Original Creality Touch Screen KIT
Compatibility: Ender 3/Ender-3 Pro/Ender-3 V2 with V4.2.2 or V4.2.7 mainboards.
Screen size: 4.3 inches

WARNING:

  • This display is not compatible with the Creality Ender-3 Max model!
  • The firmware must be selected according to the mainboard installed in your printer.
  • Based on this, download the "4.2.2_Mainboard.zip" or "4.2.7_Mainboard.zip" file from the DOWNLOADS section.

After downloading, extract the file contents and follow these steps:

  • Mainboard programming:
    • You will need a microSD card.
    • Format the microSD card.
    • Copy the appropriate .bin file onto the microSD card based on the mainboard version and the presence of the BLTouch sensor.
    • Turn off the printer’s power.
    • Insert the microSD card into the mainboard’s slot.
    • Turn on the printer’s power.
    • Next, the display firmware needs to be updated.
  • Display programming:
    • You will need a microSD card with a maximum capacity of 16GB; programming the display is not possible using a larger microSD card!!!
    • Format the microSD card using FAT32 and 4096 bytes.
      FormatUSB.png
    • Copy the DWIN_SET folder onto the microSD card from the previously downloaded folder.
      DWIN_SET.png
    • Turn off the printer’s power.
    • Disconnect the display from the printer.
    • Unscrew the 4 screws from the back of the display.
    • Insert the microSD card into the slot on the display’s PCB.
    • Reconnect the display to the printer and turn on the power.
    • The display will show some information about the file loading process, and then the screen will turn gray (the programming is complete).
      IMG20241023140815.jpg IMG20241023140824.jpg
    • Turn off the power.
    • Remove the card, disconnect the display, reattach the cover using the 4 screws, and reconnect the display.
    • Restart and test the printer’s functionality.

Package Contents:

1x touch screen display

1x cable

3x screws

3x T-nuts

Detalii
CUMIYQ_4001050015
6427854006059
Comentarii (0)
Nota
Nu sunt opinii ale clientilor in acest moment.
16 alte produse in aceeasi categorie: