Raspberry Pi display 3.5" 320x480 LCD with touch

instalare

https://www.velleman.eu/downloads/29/vmp400_a4v02.pdf

STEP 1
Obtain the LCD driver.

1.1 Online Installation
Log onto the Raspberry Pi®user system to command line (initial user name: pi, password: raspberry).
Get the newest driver from GitHub (the LCD should be connected to the Internet).
git clone https://github.com/goodtft/LCD-show.git
chmod -R 755 LCD-show
cd LCD-show

1.2 Offline Installation
Extract from the included CD-ROM or ask your seller.
Copy the LCD-show-160701.tar.gz drive to the Raspberry Pi®system root directory.
Copy flash the driver directly onto the TF card after installing the Raspbian IMAGE,or copy by SFTP or other remote copymethods.
Unzip and extract the driver files as the following command:
cd /boot
sudo tar zxvf LCD-show-160701.tar.gz
cd LCD-show/

STEP 2
Install the LCD driver.
The corresponding execution for this 3.5” LCD:
sudo ./LCD35-show
The corresponding execution to switch back to the traditional HDMI display:
sudo./LCD-hdmi
Wait for a moment after executing the above command before you can use the LCD.

• 2 out of 3 people found this review useful.