Stepper Motor Driver DM542
  • Stepper Motor Driver DM542

Stepper Motor Driver DM542

SYRLYK_DM542
lei128.52
Tax included
Quantity
49 Items

  We deliver to lockers!

Pick up your orders anytime, hassle-free!

  Fast Delivery!

Orders placed by 2:00 PM are shipped the same day. Delivered within 24h!

  2-Year Warranty

Reliable products, worry-free!

  Easy 14-Day Returns

Unused items? No questions asked!

Description

Overview

The DM542 belongs to the 2-phase hybrid stepper motor drivers. The operating voltage is between 18 and 50 VDC. The DM542 is designed for all types of 2-phase hybrid stepper motors that have an outside diameter of 42 to 86 mm and require a phase current of less than 4.0 A. The DM542 is designed for use with all types of 2-phase hybrid stepper motors. The circuitry is similar to that of the servo control and allows the motor to run smoothly and with low noise and vibration. The DM542 driver is used in medium and large numerical control devices such as bending and CNC machines, packaging machines and computer-controlled knitting machines.

Specifications

 1. Power supply voltage: 24-50V DC  (24-48VDC is recommended)
 2, 15 subdivisions are optional: 2, 4, 8, 16, 32, 64, 128, 5, 10, 20, 25, 40, 50, 100, 125
 3, the peak current can reach 4.2A (recommended to drive the following 4NM 86 and the full range of 57 motors)
 4, optocoupler isolation, input can be common, common
 5, small vibration, low noise
 6, strong anti-interference ability
 7, with overheating, overcurrent, undervoltage lockout, input voltage anti-reverse protection and other functions
 8 , can drive 4-wire, 6-wire, 8-wire stepper motor
 9 , control signal 3.3V~24V universal, no series resistor
 10 , signal input: single-ended, pulse / direction

Eectrical characteristics

 Input power 24-50V DC power supply.
 Output current  1.00A-4.20A, 8 files adjustable.
 Drive mode  Dual constant current PWM drive output.
 Insulation resistance  >500MΩ at normal temperature and pressure.
 Dielectric strength  500V/min under normal temperature and pressure.
 Weight  About 0.25 kg.

Environmental requirements

      cooling method         Naturally cooled or forced air cooled.
Use occasion   Avoid dust, oil and corrosive gases, and prohibit flammable gases and conductive dust.
Storage temperature  -20°C-65°C
environment humidity  <80% RH, no condensation, no frost.
Shock  No more than 5.7m/S2

The drive interface function

 Signal interface: PUL+ and PUL- are the positive and negative terminals of the control pulse signal; DIR+ and DIR- are the positive and negative terminals of the direction signal; EN+ and EN- are the positive and negative terminals of the enable signal.
 Motor interface: A+ and A- are connected to the positive and negative ends of the A-phase winding of the stepping motor; B+ and B- are connected to the positive and negative ends of the B-phase winding of the stepping motor. When the A and B two-phase windings are exchanged, the motors can be reversed in opposite directions.
 Power interface: powered by DC power supply, operating voltage range is 24-50VDC.
 Indicator light: The drive has two indicators, red and green . The green indicator light is the power indicator light. When the driver is powered on, the indicator light is always on; when the driver is powered off, theindicator light is off. The red indicator light is the fault indicator. When a fault occurs, the indicator is on. When the fault is cleared, the red indicator is off.
Product Details
SYRLYK_DM542
6427854025784
49 Items
Comments (0)
Grade
No customer reviews for the moment.
16 other products in the same category:
End mill for aluminium - 1 flute coated HN3A-AI-C End mill for aluminium - 1 flute coated HN3A-AI-C

Reference: TDUESN_HN3A-Al-01003-C

End mill for aluminium - 1 flute coated HN3A-AI-C

(0)
Designed for cutting aluminium, but also suitable for other metallic materials. The cutting surface is treated with a DLC (Diamond-Like Carbon) coating, which increases its hardness, thereby significantly extending its service life.
lei45.88
More
Last items in stock