![NFC card-reader module 13.56mHz PN532 compatible raspberry pi NFC card-reader module 13.56mHz PN532 compatible raspberry pi](https://ardushop.ro/8627-large_default/nfc-card-reader-module-1356mhz-pn532-compatible-raspberry-pi.jpg)
![NFC card-reader module 13.56mHz PN532 compatible raspberry pi NFC card-reader module 13.56mHz PN532 compatible raspberry pi](https://ardushop.ro/8627-large_default/nfc-card-reader-module-1356mhz-pn532-compatible-raspberry-pi.jpg)
Pick up your orders anytime, hassle-free!
Orders placed by 2:00 PM are shipped the same day. Delivered within 24h!
Reliable products, worry-free!
Unused items? No questions asked!
The PN532 is the most popular NFC chip, and is what is embedded in pretty much every phone or device that does NFC. It can pretty much do it all, such as read and write to tags and cards, communicate with phones (say for payment processing), and 'act' like a NFC tag. If you want to do any sort of embedded NFC work, this is the chip you'll want to use!
Because it can read and write tags, you can always just use this for RFID-tag projects.
The PN532 is also very flexible, you can use 3.3V TTL UART at any baud rate, I2C or SPI to communicate with it. This chip is also strongly supported by libnfc.
Longest effective communication distance of 3 cm
Supports switching of SPI, IIC and UART interface.
Can be used for 13.56M non-contact communication
Compatible with ISO14443 Type A and Type B standards
IC |
NXP PN532 |
Operating Voltage |
3.3V |
Power Supply Voltage |
3.3~5.5V |
Max Supply Current |
150mA |
Working Current(Standby Mode) |
100mA |
Working Current(Write Mode) |
120mA |
Working Current(Read Mode) |
120mA |
Indicator |
PWR |
Interface |
SPI Interface, Std Raspberry Pi 20pins Interface |
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent
Write your review
Review sent
Your review cannot be sent
Reference: HNVBDQ_BREATH_HEART_DIY
Reference: EXFOES_MH-MX18
check_circle
check_circle