Stepping motor driver DM542H,DC9-420VDC,0.5~4.8A

Stepping motor driver DM542H,dc18-80v,1.5~4.5A View larger

DM542H

New product

27 Items

18,59€ Tax excluded

Delivery: 1-5 days

Add to wishlist

Product characteristics

Signal Input: Single-ended, Pulse/Direction
Subdivision Options: 1/2/4/8/16/32/64/128 Subdivision
Output current:0.5A-4.8A
Input Voltage: 9-42VDC (DC 36V and below recommended)
Automatic Halving of Current at Station
Drive 4,6,8-wire two-phase and four-phase 57 series stepper motors (or 42 series fuselage greater than or equal to 60MM)
Photocoupler isolation signal input, strong anti-interference ability
has the functions of overheating, overcurrent, undervoltage locking, input voltage anti-reverse protection and so on.
Small size, easy to install
External signal 3.3V-24V universal, without series resistance

 

Electrical environment

Cooling modeNatural cooling or forced air cooling.
occasion

It should not be placed next to other heating equipment. Dust, oil, corrosive gas and humidity should be avoided.

Flammable gases and conductive dust are prohibited in large and strong earthquake sites.

humidity40-90%RH
shock10-55Hz/0.15mm
Storage temperature-20-65 C
weight0.2KG

 

 

Resistance mode setting

Detection Resistance Mode

S1

Internal resistance mode

ON

External resistance mode

OFF

 

Attenuation mode setting

Attenuation modeS2S3
Fast decline: 37.5%ONON
Fast decline: 50%OFFON
Fast decline: 100%ONOFF
Mixed attenuationOFFOFF

 

Running Current Setting

The output operating current is set by using S7, S8 and S9 three-digit switch as follows:

average currentpeak currentS7S8S9
0.5A0.7AONONON
1.0A1.2AONOFFON
1.8A2.0AONONOFF
2.5A2.7AONOFFOFF
3.0A3.2AOFFONON
3.5A3.7AOFFOFFON
4.0A4.2AOFFONOFF
4.5A4.8AOFFOFFOFF

 

Subdivision setting

Set the subdivision (pulse) with S4, S5 and S6 three-digit dial switches, as follows:

To subdivideNumber of pulses/cyclesS4S5S6
1Two hundredONONON
2Four hundredOFFONON
4Eight hundredONOFFON
EightOne thousand and six hundredOFFOFFON
163200ONONOFF
Thirty-two6400OFFONOFF
6412800ONOFFOFF
12825600OFFOFFOFF

Write a review

Stepping motor driver DM542H,DC9-420VDC,0.5~4.8A

Stepping motor driver DM542H,DC9-420VDC,0.5~4.8A

30 other products in the same category: