Raspberry Pi 3 Model B+ INDUSTRIAL

Description

It's the most popular SBC (Single Board Computer) in the world!

A little larger than a credit card, it has a 64 bit quad core CPU running at 1.4 Ghz with 1G RAM, enough to easily run a full Linux distro.

Can become a media player, 3d printers controller, personal server, etc.

Has 40 pins out of which 26 are generic (can be directly accesed by the user) with 3.3V logical voltage.

ATTENTION!

It needs a power supply capable of running at 5V 2.5A. If you use a smaller amperage PSU, like the ones usually used to charge phones, the system will reboot seemingly randomly.

We recommend the following model: CLICK HERE

The most notable differences between the Pi 3B+ and the Pi 3B are

• Increased clock speed to 1.4GHz
• Power over Ethernet support via new header
• Gigabit Ethernet although max speed is 300Mbps
• Increased WiFi performance in two bands
• Improved PXE network and USB mass-storage booting
• Improved thermal and power management (via MaxLinear MxL7704)
• Heat spreader (the shiny square of metal on CPU)
• Better FCC compliance due to metal shield (with Pi logo)

The Pi 3 Model B+ technical specifications are shown below :

• Broadcom BCM2837B0 chipset
• 1.4GHz Quad-Core ARM Cortex-A53, 4 cores
• 64 bit CPU
• 1GB RAM
• 4 USB 2.0 ports (via LAN7515)
• Gigabit Ethernet (via LAN7515, max speed 300Mbps)
• PoE (power over Ethernet)
• 40 pin header (26 GPIOs)
• MicroUSB power connector
• Dual-band (2.4GHz and 5GHz) 802.11ac Wireless LAN and Bluetooth 4.1 (Bluetooth Classic and LE)
• HDMI
• CSI camera interface
• DSI connector for official screen
• 3.5mm jack connector supporting stereo audio and composite video
• 2-pin reset header
• Micro SD socket